65
Parking of This Machine Parking
Before leaving the seat, lift up the safety lock handle to the locking position and stop the engine.
Meanwhile, ensure to withdraw the key, close the doors and hoods, and carry the key with you.
Stop the machine on a level, solid, and safe ground. Set the parking device.
If it’s necessary to park the machine or tilt the machine on a slope, securely park the machine and
block the machine against movement.
While parking the machine in a street, use gratings, warning signs, or lamps to keep the visible
even in the night, in order to prevent the impact with other vehicles.
Place the left and right traveling joysticks to neutral positions.
Push backward the accelerator joystick to idle the engine.
Lower the bucket and bulldozing blade onto the ground.
Lift up the safety lock handle to the locking position.
Stop the engine and withdraw the key.
Checking after Stop of Engine
Check for leakage of oil and water and check the working device, cover, and underframe. Upon
detection of any abnormality, repair.
Fully fill fuel.
Remove paper fragments and dusts from engine compartment.
Remove the mud from underframe.
Ensure to lock the following parts.
Fuel Tank Cap
Engine hood
Cover
Battery
The battery performance deteriorates along with the reduction of temperature.
Check the battery. Upon detection of battery discharging, please contact your service provider
for advice.
To Next Page
Loading...
Need help?
General