DIGGERKING King 2.3 Digger - Page 82

82
detection of any deformed or cracked pipe clamp, immediately replace it together with hose.
Please consult with your sales or service dealer for the replacement of safety parts.
Except the critical safety parts, check and tighten the hydraulic pipes and when necessary,
replace. During the replacement of hydraulic pipes, replace the O-ring and seal ring as well.
Check the fuel and hydraulic pipes as per the schedule specified by the following table
Checking type
Checking item
Daily routine checkin
g
Leakage of hydraulic or fuel pipe connector
Damage of cab or shelter
- Replace *
Monthly checking
Leakage of hydraulic or fuel pipe connector
Damage (Cracking, wear, and tear) of hydraulic or fuel pipe
Yearly checking
Leakage of hydraulic or fuel pipe connector
Aging, distortion, and damage (Cracking, wear, and tear) of hydraulic or
fuel pipe and/or status of hose in contact with other machine parts