Digi AnywhereUSB/14 User Manual

AnywhereUSB User Manual (90001085_F1) 42
 Allow SNMP clients to set device settings through SNMP: This
checkbox enables or disables the capability for users to issue SNMP
“set” commands uses use of SNMP read-only for the AnywhereUSB.
 Enable Simple Network Management Protocol (SNMP) traps: Enables
or disables the generation of SNMP traps. At the bottom of the page
are checkboxes for the SNMP traps that can be used: authentication
failure, login, cold start, and link up traps.

Digi AnywhereUSB/14 Specifications

General

Brand	Digi
Model	AnywhereUSB/14
Category	Network Router
Language	English