AnywhereUSB User Manual (90001085_F1) 43
Configure Remote Management
Remote Management Settings
The Remote Management configuration page sets up the connection to
the Connectware Manager server so the AnywhereUSB knows how to
connect to the server. The Connectware Manager server allows devices
to be configured and managed from remote locations. In order to properly
use this facility, the Connectware Manager server must first be installed
on a server system. For more information on installing the Connectware
Manager server, consult the documentation that was included with the
server.
After installing the Connectware Manager server, the AnywhereUSB must
be configured to properly communicate with the remote server system.
First, you must configure the AnywhereUSB to have a proper Device ID.
By default, the Device ID is created from the MAC address of the device.
The Device ID can be configured on the System Configuration > Device
Identity Settings page.
To Next Page
Loading...
Need help?
General
