AnywhereUSB User Manual (90001085_F1) 53
Update Firmware and Boot/POST Code
The firmware and/or Boot/Post code for the AnywhereUSB can be
updated from a file on a PC. The AnywhereUSB automatically
determines the type of image being uploaded. Before uploading the
firmware or the Boot/POST code, it is very important to read the Release
Notes supplied with the firmware to check if the Boot/POST code must be
updated before updating the firmware.
Update Firmware from a File on a PC
1. From the main menu, click Administration > Update Firmware.
The Update Firmware page is displayed.
2. Enter the name of the firmware or POST file in the Select
Firmware edit box, or click Browse to locate and select the
firmware or POST file
3. Click Update
Important: DO NOT close the browser until the update is complete and a
reboot prompt has been displayed.
To Next Page
Loading...
Need help?
General
