AnywhereUSB Installation Guide (90000405 Rev. F) – Page 9
Menu Options
File Menu: Preferences
Allows you to disable or modify the frequency in which the utility updates its discovered concentrator list.
Enables the logging of driver events to the system event log and allows you to uninstall the drivers.
Edit Menu: Connection List
Contains the IP addresses of the AnywhereUSB concentrators to which this Host PC will try to connect.
When an IP address is added to this list, the Host PC immediately tries to connect to the concentrator. If an
IP address in this list is deleted, all USB devices attached to this concentrator will be removed from this
Host PC.
Edit Menu: Discovery List
Contains a list of subnet addresses of remote networks or IP addresses of individual units where the
configuration utility will search for AnywhereUSB concentrators.
Command Menu: Configure
Allows you to configure the TCP/IP parameters in the concentrator. You can also add this IP address to the
Concentrator Connection List by checking the Connect to this Concentrator check box.
Command Menu: Connect
Adds the IP address of the Concentrator to the Connection List.
Command Menu: Event Log
Retrieves event information from AnywhereUSB Concentrator. Use this to gather information for
Technical Support. This dialog also allows you to clear the event log.
Command Menu: Reboot
Causes the Concentrator to reboot.
View Menu: Driver Information
Displays the version numbers of the AnywhereUSB drivers and allows you to uninstall the drivers.
View Menu: Refresh (F5)
Updates the Discovered Concentrator List.
To Next Page
Loading...
