Digi AnywhereUSB 8 Plus - User Manual

AnywhereUSB® Plus
User Guide

Summary

Get Started

Install the AnywhereUSB Manager

Connect the Hardware

Create Groups and Assign Client IDs

Connect to Groups or USB Devices

Configure via Web User Interface

Open Configuration and Management Web UI

Steps to access the Hub's web-based configuration interface.

Configure Hub IP Address

Update the Firmware

Restore Factory Defaults via Web UI

Configure via Command Line Interface (CLI)

Access the Command Line Interface

Steps to connect to the Hub and access its command line interface.

Configure AnywhereUSB Plus Hub via CLI

Security

Client ID

Explanation of the unique identifier for user accounts and its role in Hub access.

Troubleshooting

AnywhereUSB Manager Client ID Not Unique

Hardware

Use Reset Button for Factory Defaults

Detailed steps for performing a factory reset using the physical reset button.

Digi AnywhereUSB 8 Plus Specifications