Digi AnywhereUSB 8 Plus

Configure the AnywhereUSB Plus Hub from the CLI infoethernet
AnywhereUSB® Plus User Guide
129
infoethernet
Purpose
Displays Ethernet communications-related statistics.
Statistics that display are gathered since the statistic tables were last cleared by rebooting the Hub,
and include data, event, and error counts. These statistics are useful in understanding how the Hub is
operating and can be helpful in finding problems. In particular, if an error counter is found to be
increasing there may be a problem with the Hub.
To reset the statistics, reboot the device.
Syntax
info ethernet
Examples
#> info eth
Ethernet Statistics:
Bytes Received : 49094876 Bytes Sent : 177210984
Unicast Packets Received : 325217 Unicast Packets Sent : 155961
Receive Errors : 0 Send Errors : 0
Received Packets Dropped : 0 Sent Packets Dropped : 0
Multicast Packets Received : 0