Digi AnywhereUSB Plus Series

AnywhereUSB® Plus
User Guide

Digi AnywhereUSB Plus Series Specifications

General

Network Interface	10/100/1000 Mbps Ethernet
USB Standard	USB 3.1 Gen 1
Security	SSL/TLS, SSH
Management	Web UI, CLI, SNMP
Power Supply	12V DC
Operating Temperature	0°C to 50°C
USB Ports	4 or 8

Summary

Get Started

Install AnywhereUSB Manager

Guides through downloading and installing the AnywhereUSB Manager software on your computer.

Connect Hardware

Provides instructions for physically connecting the AnywhereUSB Plus Hub to your network.

Create Groups and Assign Client IDs

Create Groups and Assign Ports

Assign Group to Client ID

Connect to Group or USB Device

Connect to a Group

Describes how to establish a connection to a group of USB ports in the AnywhereUSB Manager.

Connect to a USB Device

Explains how to connect to an individual USB device within a group using the manager.

Administrators: Configure AnywhereUSB Plus in Web UI

Open Configuration and Management Web UI

Guide to accessing the web-based interface for Hub configuration and management.

Configure and Manage Client IDs

Details on adding, configuring, and managing client IDs for Hub access via web UI.

Change Hub Password

Update Firmware

Configure AnywhereUSB Manager from Command Line

Autoconnect and Autofind Commands

Device and Group Management CLI

General CLI Commands

Security

Client ID Management

Troubleshooting

Client ID Issues

Connectivity and Discovery Issues

Hub Certificate and Access Issues

Hardware

Restore Factory Defaults using Reset Button

Procedure to reset the Hub to factory default settings using the physical reset button.

Regulatory and Safety Information

Safety Warnings

Important safety warnings and precautions for using the AnywhereUSB Plus Hub.