Configure the AnywhereUSB Plus Hub from the CLI infotcp
AnywhereUSB® Plus User Guide
132
infotcp
Purpose
Displays statistics relating to Transmission Control Protocol (TCP) activity. Statistics displayed are
those gathered since the statistic tables were last cleared by rebooting the Hub, and include data,
event, and error counts. These statistics are useful in understanding how the Hub is operating and can
be helpful in finding problems. In particular, if an error counter is increasing there may be a problem
with the Hub.
To reset the statistics, reboot the device.
Syntax
info tcp
Example
#> info tcp
TCP Statistics:
Segments Received : 94106 Segments Sent : 147569
Currently Established : 2 Segments Retransmitted : 213
Passive Opens : 2907 Active Opens : 1
Receive Errors : 0 Attempt Fails : 0
Established Resets : 4 Resets Sent : 1
To Next Page
Loading...
Need help?
General