Digi AnywhereUSB Plus Series User Manual

Deployment
This process describes how to re-deploy a Hub.
Note If you want to deploy a new Hub, see Get started.
1. If you are re-deploying a Hub, remove the Hub from the network.
2. Make a connection between the Hub and each computer that should be allowed to connect to
the Hub.
a. Connect the hardware.
b. Verify initial connection.
AnywhereUSB® Plus User Guide
154

Digi AnywhereUSB Plus Series Specifications

General

Network Interface	10/100/1000 Mbps Ethernet
USB Standard	USB 3.1 Gen 1
Security	SSL/TLS, SSH
Management	Web UI, CLI, SNMP
Power Supply	12V DC
Operating Temperature	0°C to 50°C
USB Ports	4 or 8