Configure the device using the ConnectPort LTS web interface Configuration through the web interface
Digi ConnectPort LTS User Guide
80
Device Identity Settings
Use the Device Identity Settings page to create a description of the ConnectPort LTS product’s name,
contact, and location. You can use this information to identify a specific Digi device product when
working with a large number of devices in multiple locations.
n Description: The network name assigned to the Digi device.
n Contact: The SNMP contact person (often the network administrator).
n Location: A text description of the physical location of the Digi device.
n Device ID: A text description of the device ID used to identify the device (for example, MAC or
IPaddress).
Simple Network Management Protocol (SNMP) Settings
Use the Simple Network Management Protocol (SNMP) Settings page to manage and monitor
network devices. You can configure ConnectPort LTS devices to use SNMP features, or you can disable
SNMP for security reasons. For additional information, see Simple Network Management Protocol
(SNMP).
n Enable Simple Network Management Protocol (SNMP): This check box enables or disables
use of SNMP.
l The Public community and Private community fields specify passwords required to get
or set SNMP-managed objects. Changing public and private community names from their
defaults is recommended to prevent unauthorized access to the device.
l Public community: The password required to get SNMP-managed objects. The default is
public.
l Private community: The password required to set SNMP-managed objects. The default is
private.
l Allow SNMP clients to set device settings through SNMP: This check box enables or
disables the capability for users to issue SNMP set commands uses use of SNMP read-only
for the Digi device.
n Enable Simple Network Management Protocol (SNMP) v1/v2c: This check box enables or
disables use of SNMP version 1 or version2c.
l SNMPv1/v2c Get community: The password required to get SNMP-managed objects. The
default is public. Changing get and set community names from their defaults is
recommended to prevent unauthorized access to the device.
l SNMPv1/v2c Set community: The password required to set SNMP-managed objects. The
default is private.
l SNMPv1/v2c Permission: Allow SNMP clients to set device settings through SNMP:
l get only: Disables the capability for users to issue SNMP set commands uses use of SNMP
read-only for the ConnectPort LTS product.
l get/set: Enables the capability for users to issue SNMP set commands uses use of SNMP
read-only for the ConnectPort LTS product.
To Next Page
Loading...
Need help?
General