Digi One SP User Manual

Chapter 4
Configuring Advanced Functions 27
• Provide the IP address of the server or other device to
which the connection should be made.
• Specify the TCP port number for connections. The port
number depends on the conventions used on the
remote server or device. The following table provides
common TCP port numbering conventions. However,
the remote device may not use these conventions:
• Specify a service to use for the connection.
• Specify other options as required. Use the online help
for information on configuration fields. One option,
Force DCD should be specified only in the following
circumstances: (1) You want the connection up all the
time. (2) The Device type specified on the Port Config-
uration page is Modem in.
8. When you complete configuration changes, choose Sub-
mit to commit the configuration.
Connection Type
Common TCP
Port
Telnet 23
Rlogin 513
Reverse Telnet to the port of a Digi
device server
2001
Raw connection to the port of a
Digi device server
2101

Digi One SP Specifications

General

Brand	Digi
Model	One SP
Category	Server
Language	English