Digi SM-100 - Page 66

SM – 100 Operation Manual
55
OPERATION
DISPLAY
REMARK
PT kg
＄/kg ＄
[C][A][K][E]
[*]
S1.4 C02.01 S1 A 100
Enter the 2
nd
line of comm ddity
name.
[*] S1.5 PLU EAN BARCODE
Select the type of BARCODE by
press [X] or [>>].(EAN or ITF)
[*] S1.6 PLU DFLT BARCODE
Select barcode format by press
[<<] or [>>] key.(Ex.2f5c4i4wD)
[<<] or [>>]
[*]
S1.7 PLU 20 FLAG
Set flag data.(Ex.29)
The Default Flag Data can be set at
SPEC 3 ~ 6 and the Flag data
consists of one or two digits, which
depends on the selected Barcode
type.
[2][9]
[*]
S1.8 PLU 00000 IT CODE Enter item code.(Ex.20020)
[2][0][0][2][0]
[*]
S1.9 PLU 00000 EX CODE
No appended item code of PLU
100.
[*] S1.10 PLU EAN ADD OFF
Select EAN ADD-ON or EAN
ADD-OFF.(Ex. EAN ADD-OFF)
[*] S1.12 PLU 997 MG NO
Set the Main Group
number.(default MG 997)
Enter Main Group No.(Ex.222)
Link PLU 200 to Main Group 222.
[2][2][2]
[*]
S1.13 PLU NPRINT SELL DT
Press [<<] or [>>] key to change
whether print sell-by-date.
(Ex. Print sell by date)
[<<] or [>>]
[*]
S1.14 PLU 0 SELL DT
Set sell-by-date.(Ex.3 days)
3 digits can be set.(0~999)
[3]
[*]
S1.15 PLU NPRINT SELL TM
Press [<<] or [>>] key to change
whether print sell-by-time.
(Ex. No print sell by time)
[*] S1.18 PLU NPRINT USED DT
Press [<<] or [>>] key to change
whether print used by date.
Set used-by-date,
used-by-time
… … … …
Setting way of used-by-date, used-
by-time are same as setting sell-by-
date and sell-by-time.