Need help?Do you have a question about the Digi SM-5300 and is the answer not in the manual?
General| Material | Stainless steel |
|---|---|
| Overload Protection | Yes |
| Display | LCD |
| Capacity | 12kg or 15kg |
| Resolution | 5 g |
| Interface | RS-232 |
| Units | kg, g |
| Auto Power Off | Yes |
Covers electrical safety, proper placement, operation limits, and care during use.
Precautions for battery replacement, handling, and proper disposal methods.
Outlines FCC interference standards and RF exposure compliance.
Details compliance requirements specific to Singapore's IDA.
Lists hazardous materials in the product for proper end-of-life disposal.
Details model variations, CPU, RAM, OS, capacity, weight, and display.
Covers power source, consumption, operating environment, and print parameters.
Provides overall dimensions for Bench, Pole, Elevated, and SSP models.
Details label types, sizes, and roll specifications for printing.
Describes the keyboard layout and the function of each key.
Details the layout and elements of both operator and self-service displays.
Diagram illustrating the software's functional hierarchy and menus.
Details I/O ports for Bench, Pole, Elevated, and SSP models.
Explains the span switch operation and weight/measure sealing.
Covers physical setup like leveling the scale and cassette alignment.
Identifies and explains the location and function of various sensors.
Guides on setting country, user, module, scale, and W&M specifications.
Procedures for setting date, time, daylight saving, and exiting self-service.
Detailed steps for performing weight calibration on the scale.
Steps for configuring network interface and IP address settings.
Procedures for setting the scale's MAC address and VNC password.
Configuration steps for the WLAN AP-3001G wireless adapter.
Covers printer status checks and calibration for Gap, Peel, and Paper End sensors.
Details database initialization, clearing, loading defaults, backup, and restore.
Procedures for backing up and restoring data using a USB storage device.
Covers testing of input, USB, Ethernet, cash drawer, and LCD components.
Step-by-step guide for calibrating the touch screen interface.
Viewing system details and writing the AD checksum.
Covers thermal head cleaning, surface cleaning, and thermal head disassembly.
Instructions for upgrading PCScale software and printer firmware.
Steps to disassemble platter, display, base, power, and AD boards for SM-5300B.
Steps to disassemble pole, display, top cover, base, power, and AD boards for SM-5300P.
System block diagrams illustrating internal connections for different models.
Details base board connectors, layout, and jumper configurations for models.
Details the relay board's connectors and jumper configurations.
Specifies the pin assignments for Ethernet, USB, and cash drawer ports.
Tracks changes and updates made to the service manual across different versions.
To Next Page
