To Next PageTo Next Page
Need help?Do you have a question about the Digi DS-685L Series and is the answer not in the manual?
Details specific model names, display resolution, and platter size.
Lists key features like low cost, quick response, capacity, and resolution.
Illustrates the physical appearance of the scale, bench and pole types.
Provides detailed dimensional drawings and measurements for scale models.
Shows the layout of keys for different models, Type A and Type B.
Explains key functions, covering Type A (8 Preset Keys) and Type B (14 Preset Keys).
Specifies operating requirements like power source, temperature, and humidity.
Outlines the charging process for rechargeable batteries, including voltage and time.
Details analog specifications such as input sensitivity and A/D conversion speed.
Lists the main electronic components used in the scale's design.
Specifies capacity, graduation, and tare range for DS-685L and DS-685F models.
Identifies the location of the SPAN switch and stopper screws for calibration.
Explains how to view internal count and A/D count values.
Provides step-by-step instructions for performing SPAN adjustment.
Describes the procedure to exit calibration mode and return to weighing.
Details setting user specifications (141) and entering technical specifications (142).
Lists customer (141) and weight/measure (142) specifications for DS-685L.
Lists customer (141) and weight/measure (142) specifications for DS-685F.
Shows the positions for sealing screws on the scale for tamper-proofing.
Covers electrical diagrams (NRFI, RFI) and microcomputer pin assignments for DS-685L.
Covers electrical diagrams (NRFI, RFI) and microcomputer pin assignments for DS-685F.
General
