Need help?Do you have a question about the Digi DC-180 and is the answer not in the manual?
Overview of the DC-180 counting scale's functionality and applications.
Details the layout and functions of the scale's keyboard and display.
Explains the meaning of each indicator lamp on the scale.
Describes the functions of each key on the scale's interface.
Lists the weight and counting resolutions for different DC-180 models.
Procedures for unpacking, inspecting for damage, and repacking the scale.
Instructions for removing locking screws before scale operation.
Detailed steps for removing locking screws for smaller scale models.
Steps for installing the optional battery pack into the DC-180.
Explains how to perform tare reduction using one-touch or digital methods.
Details methods for calculating unit weight by sampling or key entry.
Describes how to accumulate totals and subtract values.
How to clear data and switch between built-in and remote scales.
Procedure for recalling stored item data using ID codes.
How to set programmable points based on quantity or weight percentages.
Setting programmable points using upper/lower quantity or weight limits.
How to program and manage item data using ID codes.
Step-by-step guide for calibrating the scale's accuracy.
Procedures for setting scale specifications (Spec 141 and 142).
Detailed list of all operational specifications for the DC-180.
Details on minimum display, decimal point, zero settings, and scale types.
Wiring diagram and pin assignments for DIGI REMOTE platform.
Contains miscellaneous notes related to shop or service operations.
Details the terms, conditions, exclusions, and limitations of the product warranty.
To Next Page
General
