Need help?Do you have a question about the Digi DC-788 and is the answer not in the manual?
Details the number of digits for Tare, Weight, Unit Weight, and Quantity displays.
Explains the function of various indicator lights like ZERO, NET, INSUFF, BATT, etc.
Details the H8/3687 Series Microcomputer and reasons for its selection.
Lists pin assignments, I/O, device, and remarks for the microcomputer.
Describes the procedure for turning the scale ON and OFF.
Explains methods for subtracting tare weight.
Procedures for entering unit weight, including sampling and digital input.
Procedure to add more samples when initial weight is insufficient.
How to accept a suggestion to add more samples.
How to disregard a suggestion for adding samples.
Steps for performing a single parts counting operation.
How to accumulate and subtract parts count data.
Explains the function for negative counting, e.g., for containers.
Procedure to retrieve item codes using numeric input.
Procedure to retrieve item codes using alphanumeric input.
How to view the contents of a programmed PLU.
Instructions for programming new item codes into memory.
Steps to remove a specific item code from memory.
Procedure to erase all item codes from memory.
How to clear all inventory data from the scale's memory.
Steps to remove all unit weight data from memory.
To Next Page
General
