Digi DC-788 - Delete all Tare Weight Values; Delete all Parts Numbers; Delete all Setpoint Data; Delete all Parts Names

20
20.2.5. Delete all Tare Weight Value from Memory
1 - ZERO 2 - NET 3 - GROSS 4 - INSUFF 5 - RECOMP 6 – PROG
OPERATION
Key-in
TARE WEIGHT U.Weight QTY. 1 2 3 4 5 6
Weighing mode. 0.0 0 0 0.0 0 0 0 0
Enter into Program mode. [MODE] P r o G C 2 0
[RE-ZERO] [RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
[RE-ZERO] + [.] [.] [3]
Enter . . 3 while pressing. [RE-ZERO]
[RE-ZERO] +
[.] [.] [3]
TAREW CLEAr
Delete all Tare Weight value. [C] P r o G C 2 0
Quit to Weighing mode. [MODE] 0.0 0 0 0.0 0 0 0 0
Note: *1) Press [MODE] key to go back to weighing mode without clearing.
20.2.6. Delete all Parts Numbers from Memory
1 - ZERO 2 - NET 3 - GROSS 4 - INSUFF 5 - RECOMP 6 – PROG
OPERATION
Key-in
TARE WEIGHT U.Weight QTY. 1 2 3 4 5 6
Weighing mode. 0.0 0 0 0.0 0 0 0 0
Enter into Program mode. [MODE] P r o G C 2 0
[RE-ZERO] [RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
[RE-ZERO] + [.] [.] [4]
Enter . . 4 while pressing. [RE-ZERO]
[RE-ZERO] +
[.] [.] [4]
PARTSNo CLEAr
Delete all Parts Number. [C] P r o G C 2 0
Quit to Weighing mode. [MODE] 0.0 0 0 0.0 0 0 0 0
Note: *1) Press [MODE] key to go back to weighing mode without clearing.
20.2.7. Delete all Setpoint Data from Memory
1 - ZERO 2 - NET 3 - GROSS 4 - INSUFF 5 - RECOMP 6 – PROG
OPERATION
Key-in
TARE WEIGHT U.Weight QTY. 1 2 3 4 5 6
Weighing mode. 0.0 0 0 0.0 0 0 0 0
Enter into Program mode. [MODE] P r o G C 2 0
[RE-ZERO] [RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
[RE-ZERO] + [.] [.] [5]
Enter . . 5 while pressing. [RE-ZERO]
[RE-ZERO] +
[.] [.] [5]
SetPOINT CLEAr
Delete all Setpoint Data. [C] P r o G C 2 0
Quit to Weighing mode. [MODE] 0.0 0 0 0.0 0 0 0 0
Note: *1) Press [MODE] key to go back to weighing mode without clearing.
20.2.8. Delete all Parts Name from Memory
1 - ZERO 2 - NET 3 - GROSS 4 - INSUFF 5 - RECOMP 6 – PROG
OPERATION
Key-in
TARE WEIGHT U.Weight QTY. 1 2 3 4 5 6
Weighing mode. 0.0 0 0 0.0 0 0 0 0
Enter into Program mode. [MODE] P r o G C 2 0
[RE-ZERO] [RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
[RE-ZERO] + [.] [.] [6]
Enter . . 6 while pressing. [RE-ZERO]
[RE-ZERO] +
[.] [.] [6]
PName CLEAr
Delete all Parts Name. [C] P r o G C 2 0
Quit to Weighing mode. [MODE] 0.0 0 0 0.0 0 0 0 0
Note: *1) Press [MODE] key to go back to weighing mode without clearing.