Need help?Do you have a question about the Digi DS-470 and is the answer not in the manual?
Describes the key functionalities and capabilities of the DS-470 scale.
Lists detailed technical parameters like model name, capacity, resolution, dimensions, and interface.
Provides visual representation and measurements of the scale's physical size and layout.
Instructions for safely removing the scale and its components from the packaging.
Step-by-step guide for connecting the scale to external devices via RS-232 cable.
Details the process for removing transport lock screws for the DS-470 SS model.
Guides on how to properly set up and prepare the scale for operation.
Explains the layout of the scale's keys and the information displayed on the screen.
Provides a general outline of the steps involved in operating the scale.
Details the method for setting a fixed tare value using numeric keys.
Explains how to set tare weight quickly by placing an object on the scale.
Describes entering minimum and maximum weight values using the numeric keypad.
Guides on setting min/max ranges by placing known weights on the scale.
Details setting min/max ranges based on a target weight and percentage.
Explains setting min/max ranges using a target weight and percentage adjustments.
Describes the check weighing process when using a full container on the scale.
Outlines the check weighing procedure specifically for filling containers.
Instructions for resetting or clearing the previously set minimum and maximum weight limits.
Defines the communication parameters for RS-232 interface, including baud rate and data bits.
Details the function of each pin in the RS-232 connector for proper wiring.
Describes the continuous data transmission method via RS-232.
Explains manual data output by pressing a specific key, method one.
Describes manual data output, method two, with or without headers.
Details data transmission initiated by an external device using commands.
How external devices can send set-point data to the scale.
How the scale sends set-point data to external devices.
Guidelines for cleaning and maintaining the scale's exterior and internal components.
Specific instructions for cleaning the external surfaces of the scale.
Information on who should perform service and repair, and in what conditions.
Procedures for changing customer-specific settings and parameters.
Instructions for configuring settings related to weights and measures regulations.
Describes how to check the status of the span switch, indicating calibration readiness.
How to view the internal count of the Analog-to-Digital converter for diagnostics.
Detailed steps to enter and perform calibration for the scale's accuracy.
Explains various error messages and display indicators shown by the scale.
To Next Page
General
