16
6.1.4.2. MANUAL
Data is output by pressing [½
½½
½] key. User may select to transmit the data right away
or to hold the command until weight becomes stable (from Spec 59 bit 1). If weight
is not back to stable within a certain interval (from Spec 59 bit 0), TIME OUT ERROR
will appear on the display. The two communication methods may be selected in this
mode.
6.1.4.2.1. MANUAL (METHOD 1)
DATA FORMAT:
Example: By pressing [½
½½
½] key.
STX Header Gross Weight CR Header Net Weight CR
1 1 5 1 1 5 1
Header Tare Weight CR Header Set-point Status CR LF
1 5 1 1 2 1 1
To Next Page
Loading...
Need help?
General
