3
2.2. Physical Dimensions
2.3. Color LED Bar Graph
LEDs provide clear indication of weight condition between minimum and
maximum besides the digital weight display.
Target range is determined by entering 2 set points (min and max range.) The value can be
entered by any method described in section (5.6.) on pages 13 - 15. Set points alert the operator
with both auditory and visual signals if weight is within the target range.
The graduation of LED is determined by dividing the target range by 5 (Max weight – Min weight /5)
This LED is lit as the low min. This LED is lit as the min. acceptance range. This LED is lit as the high max.
To Next Page
Loading...
Need help?
General
