Digi DC-180 - Weighing Mode Operations; Tare Reduction Operations

13
5.0. Operation Guide in Weighing Mode
5.1. Tare Reduction :
5.1.1. One Touch Tare Operation :
1 Display in the weighing mode
2 Place 0.5 Lb weight on the platter. (Example : of a .5lb tare)
3 Press the [TARE] key to tare the weight on the platter
4 Remove the weight from the platter
Note : The tare operation is valid up to the 4th digit of the weight column. For Example ;
when we attempt to tare a weight of 1.0000 lb, on a 5.0000 lb machine, the error buzzer
comes on. So, the maximum permissible tare value is 0.9995 lb. But for a 10.000 lb
machine, the maximum permissible tare value (for 100 % FS setting) is 9.998 lb.
5.1.2. Digital Tare Operation :
1 Display in the weighing mode.
2 Enter [0][.][5][0][0][0] (Example : of a .5lb tare)
3 Press the [TARE] key to tare the weight entered by keyboard.
Note : The same note as in One Touch Tare applies for Digital Tare as well.
5.2. Net/Gross Operation :
1 Display in the weighing mode.
2 Place 0.5 Lb. weight on the platter.
3 Press the [TARE] key to tare the weight on the platter.
4 Place an additional 0.5 Lb. on the platter.
5 Press the [NET / GROSS] key. 1.0000 lb is the Gross Weight.
6 Press the [NET / GROSS] key. 0.5000 lb is the Net Weight.
DISCONTINUED