7
1.5. Key Switch Information
KEY FUNCTIONS
On/Off For turning the machine ON and OFF.
0 to 9 Numeric Keys.
.
Decimal Point.
Rezero Used to reset the scale to zero.
Used to enter the maintenance mode along with other keys
Tare Used for setting and clearing tare weight.
Kg/Lb Used to change the weighing unit between Kilogram and Pound.
C Used to clear the key entries and unit weight.
Net/Gross Used to change between Gross and Net.
Unit Weight Used to enter the unit weight using numeric key board.
Mode Used for entering programming mode from weighing mode.
Scale 1 __
__
2 Used to switch between Built-in Platform and Remote Platform.
+
Used for Accumulation function and for incrementing SPEC
numbers in SPEC setting mode.
-
Used for Subtraction function and for decrementing SPEC
numbers in SPEC setting mode.
*
Used for storing the specification data and used to print out weight
information when printer is connected.
#
PLU key, for calling out PLU data.
PIECES Used for computing unit weight by sampling.
To Next Page
Loading...
Need help?
General
