Digi DS-685L Series - SPAN Adjustment; Escape From Calibration Mode

DS-685L/F Series Service Manual
Page No. 4
1.5. Key-Sheet Layout
Keysheet Type A
Keysheet Type B
1.6. Key Function
1.6.1. Type A (8 Preset Keys)
: ON/OFF key. Turn the power ON or OFF.
to : PRESET keys. Set up or call either unit price.
to : Numeric keys. Input numeric value.
: TARE key. Set or clear tare value.
: CLEAR key. Clear numerical values.
: AUTO key. Select whether or not to clear a unit price (and/or) tare value.
: Multiple key, Register the same non-weighing product multiple times.
: HOLD key. Holds the display value for 8 seconds.
: MINUS key. Correction operation on products.
: AMT/TEND key. Used to enter amount tendered. Two different types of AMT/TEND
operation can be selected by SPEC 9 BIT 3.
: PLUS key. Adds sum, accumulated sum.
: RE-ZERO key. Resets weight display to zero.
: MODE SET key. Switch into following modes: Program & Grand Total Check Mode.
: Data Setting key. Set up or clear mode.
1.6.2. Type B (14 Preset Keys)
: ON/OFF key. Turn the power ON or OFF.
to : PRESET keys. Set up or call either unit price.
to : Numeric keys. Input numerical value.
: TARE key. Set or clear tare value.
: CLEAR key. Clear numerical values.
: RE-ZERO key. Resets weight display to zero.
: MODE SET key. Switch into Program Mode.
: Data Setting key. Set up or clear mode.
All manuals and user guides at all-guides.com