S M - 5 3 0 0 S e r v i c e M a n u a l
S M - 5 3 0 0 S e r v i c e M a n u a l || 5353
Initial SetupInitial Setup
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
5.6 Span Adjustment (Weight Calibration)
5.6 Span Adjustment (Weight Calibration)
5.6 Span Adjustment (Weight Calibration)5.6 Span Adjustment (Weight Calibration)
Note: Ensure the Span Switch is set toNote: Ensure the Span Switch is set to
[Enable][Enable]
..
Procedure Picture
Procedure Picture
1) 1) In In Registration Registration mode, mode, press press and and follow follow byby
key button to MENUkey button to MENU
[MAINTENANCE][MAINTENANCE]
[MAINTENANCE][MAINTENANCE]
[SCALE][SCALE]
[CALIBRATION][CALIBRATION]
to go to to go to calibration mode.calibration mode.
2) In Calibration mode, check the 2) In Calibration mode, check the setting and touchsetting and touch
[NEXT][NEXT] to continue.to continue.
3) Ensure there is no weight on the 3) Ensure there is no weight on the platter, and touchplatter, and touch
[NEXT][NEXT]..
4) Wait for 4) Wait for Zero Weight calibration in progress.Zero Weight calibration in progress.
To Next Page
Loading...
Need help?
General
