How to test a WR31 router step by step.
Page | 7
3.4 Launch FlashWriter
Launch Flashwriter from the start menu. Select the communications port number (PC comm. port
number) to which the WR31 is connected. (On most PC’s with a built in serial port, this will be “1” OR
“2”. Leave the other settings at their default values (TFTP and Event driven mode ONLY ticked):
Click Load
If your PC has more than one network adapter, be sure to select the one that represents the
connection to “Office Network” illustrated in 0.
If your PC only has a single network adapter this screen will not appear:
To Next Page
Loading...
