Need help?Do you have a question about the digico SD Series and is the answer not in the manual?
Details about the product license agreement and permitted/prohibited uses.
Lists trademarks and registered trademarks of Digico UK Ltd and Microsoft.
Explains the physical layout of the left and right sections of the console worksurface.
Describes how the worksurface is divided into layers and banks of twelve channels.
Explains accessing functions via touchscreen and physical controls.
Describes how a channel is assigned to worksurface controls for detailed configuration.
Explains the function and reassignment of the two master faders.
Details the four different channel types laid out on the worksurface.
Provides an overview of connecting the console to racks via MADI and optical fibre.
Details how to view and configure IP addresses for the console PC and host interface.
Explains using pre-configured session templates for quick setup.
Guides on defining channel types, counts, and busses for a new session.
Details configuring physical I/O, including option cards and local I/O.
Explains compatibility and usage of Optocore firmware versions with different rack types.
Describes setting up a single console system with Optocore.
Explains the process of conforming racks and checking I/O capability.
Details how to manually conform racks and individual cards.
Explains how to share racks between multiple consoles and set control states.
Guides on assigning channels to the worksurface faders after restructuring.
Instructions for saving a session with a new filename and description.
Describes the quick save function for updating an existing session.
Instructions for loading a previously saved session from storage.
Explains the process of routing inputs and outputs via dedicated displays.
Describes the function for incrementally routing channels.
Details how to name channels on the console's scribble strip.
Explains the EQ section with parametric filters and dynamic control.
Describes the dynamics modules, compressor, gate, de-esser, and multiband options.
Explains accessing and controlling auxiliary sends on the console.
Provides step-by-step instructions for installing DMI cards into the SD12.
Explains how to connect MADI DMI cards to racks using BNC or Cat5e.
Details sharing racks between consoles using MADI DMI connections.
General| Type | Digital Mixing Console |
|---|---|
| EQ | 4-band parametric EQ on every input and output channel |
| Routing | Flexible, matrix-based |
| Connectivity | Ethernet, MADI, Optocore, AES, Dante |
| Processing | FPGA-based |
| Sample Rate | Up to 96kHz |
| Word Clock | Yes |
| Dynamic Processing | Gate, Compressor, Limiter |
| Effects | Reverb, Delay, Modulation |
| Automation | Full automation support |
| Recallable Preamp | Yes |
| Workflow | Intuitive and customizable user interface |
To Next Page
