17
lected correctly as separate waste, it can be recycled,
treated and disposed of ecologically; this avoids a
negative impact on both the environment and health,
and contributes towards the recycling of the product’s
materials.
For further information regarding the waste disposal
services available, contact your local waste disposal
agency or the shop where you bought the appliance.
CONFORMITY WITH EU DIRECTIVE 2006/66/
EC AS AMENDED.
The crossed bin symbol on the battery or its packa-
ging, means that the batteries, at the end of their life,
should be disposed of separately from the municipal
waste stream via designated collection facilities ap-
pointed by the government or the local authorities,
or otherwise returned to the dealer when purchasing
new equivalent rechargeable or non-rechargeable
batteries. The separate disposal of the batteries con-
tained within the product is by the consortium that will
take care of the disposal of the entire RAEE. The faculty
- and not the obligation – to carry out the withdrawal
according to the one-for-zero criterion is left to distri-
butors with retail sales area of less than 400 square
meters of AEE and distributors who make sales using
remote communication techniques (online selling).
Chemical symbols (Hg for mercury, Cd for cadmium,
Pb for lead) printed beneath the crossed-out wheeled
bin symbol indicate the type of substance contained
in the battery.
The user is responsible for taking the batteries to spe-
cial waste disposal sites at the end of their life to allow
for their processing and recycling. 1588 20 The cor-
rect disposal of your old toy will help prevent potential
negative consequences for the environment and hu-
man health and favour the recycling of the materials of
which the product is made. Improper disposal of the
product by the user may harm the environment and
human health. For further information regarding the
waste disposal services available, contact your local
waste disposal agency or the shop where you bought
the appliance.
1.5. Declaration of compliance
Digicom hereby declares that Tippy Pad is in confor-
mity with the essential requirements and the related
dispositions established by directive 2014/53/UE.
A copy of the complete Declaration of Compliance
can be consulted at:
www.tippyonboard.com
. In ac-
cordance with the European Commission Decision
N°2000/299/EC dated 06/04/2000, the frequency
band used by this product has been harmonized for
all EU Countries and therefore this is a Class 1 product
which can be used in all European Community Coun-
tries.
Digicom reserves the right to change information pro-
vided in this manual at any time and without notice.
The reproduction, transmission, transcription or tran-
slation into another language, of any part and in any
form of this manual is strictly prohibited without prior
written consent from Digicom.
1.6. Self-certification conformity DL122
Digicom hereby declares that the Tippy Smart Pad an-
ti-surrender device used in combination with the “Tip-
py” mobile phone application or in combination with
the Tippy-Fi accessory complies with the provisions of
Ministerial Decree no. 122 of 02/10/2019.
Below is the A5 format copy of the Self-Certification.
To view and/or download it in A4 format visit www.
tippyonboard.com/tippypad.
1.7. Bluetooth technology and testing
SAR
The company Digicom to confirm the absolute safety
of the Bluetooth technology used by the Tippy Pad
anti abandonment device, has carried out SAR (Speci-
fic Absorption Rate) tests on the product at the Sicom
Testing laboratory. These tests measure the percenta-
ge of electromagnetic energy absorbed by the human
body when it is near a radio frequency magnetic field.
The values thus obtained make it possible to verify that
the limits of safe exposure to electromagnetic fields
are respected. Tippy Pad emissions are well below the
legal limit.
To view and/or download the report visit www.tip-
pyonboard.com/tippypad.
1.8. Warranty
The product is guaranteed against any conformi-
ty defect in normal conditions of use as provided
by the instructions for use. The warranty shall not
therefore apply in the case of damages caused by
improper use, wear or accidental events. For the
duration of warranty on conformity defects please
refer to the specific provisions of national laws ap-
plicable in the country of purchase, where provided.
2. Installation of Tippy on child
seat
Tippy Pad can be installed on any car seat.
2.1. Installation on a seat with crotch
strap
Install the Tippy Pad on the car seat (as shown in Figu-
re 1) by passing the seatbelt’s leg spreader anchorage
(shown with a red circle) through the horizontal slot of
the Tippy Pad (shown in Figure 2 with a green circle).
All installation steps are shown in Figure 3.
To Next Page
Loading...
General