19
alert SMS and alarm sound are triggered even if the
application is in background state.
If the user do not silence the alarm, when the count-
down expires an emergency SMS containing the posi-
tion of the car is forwarded to the emergency telepho-
ne numbers. Note that the position is included in the
alert message only if localization services is enabled
on the phone.
3.4. Level and battery monitoring
The battery has an estimated life of 4 years, based
on an average usage of 2 hours a day. The battery is
neither rechargeable nor replaceable. The Digicom
company has made this choice for a matter of con-
sumer safety, so that replacing or recharging it does
not compromise its functionality as it is an electronic
product. Furthermore, Digicom has chosen to use a
battery that can withstand up to 85 degrees, because
very high temperatures can be reached inside the car.
Commercially available replaceable batteries do not
normally withstand temperatures above 60 degrees.
The Tippy Pad battery guarantees maximum perfor-
mance and safety even in extreme weather conditions.
The battery level of Tippy Pad can be viewed on the
main screen
of the app, when Tippy Pad is “connected with sitting
baby.”
IIn case the battery is low the user will be notified by
the application with a message (Figure 14), which will
give the correct instructions to follow. The user must in
fact contact his dealer or contact the customer service
to replace the product.
3.5. Settings
Click on the symbol in the main screen (
Figure 8
) to
change the application settings (
Figure 15
).
- Change the notification sound (click on “Notifica-
tions”);
- Read the terms and conditions for the use (Click on
“Terms and Conditions”);
- Follow a tutorial that explains how to use Tippy Pad
(click on “Help”).
- Click on “Logout” to definitively exit the ap-
plication . When the user click on “Logout”, the
application doesn’t work and it is not possi-
ble anymore to detect the presence of the child.
Open again the application to correctly use Tippy Pad.
WARNING!
For all iOS devices that have logged out, it is necessary
to pairing with the previously registered Tippy Pad
again to restore its correct functioning.
4. Product
maintenance
The outer cover is removable and washable according
to the instructions on the inner label.
Follow the instructions carefully to avoid damages:
1. Open the zip and pull out the inside part, taking care
to keep it, when not covered, in a dry and clean place.
2.Reinsert the interior part after washing, positioning
the weight sensor facing the side of the liner with the
Tippy Pad letter.
3. Do not tamper or dismantle the interior part, do not
remove the weight sensor.
5. Customer Service
For more information and assistance visit the FAQ ses-
sion of the official website .
In case of need, please contact Digicom customer
service by filling out the contact form in the “Techni-
cal Assistance” section on the official website www.
tippyonboard.com. Alternatively, write an e-mail, with
the serial number of the product, directly to the fol-
lowing address customerservice@digicom.it.
To Next Page
Loading...
General