Mbox 2 Pro Getting Started34
Grounding Post
The Grounding Post is for grounding turntables
and other types of DJ equipment to Mbox 2 Pro.
Mic/Line 1 and 2
Each analog source input channel (Input 1 and
Input 2) provides Mic (XLR) and Line (TRS) in-
put on combination jacks. On the front panel,
the input signal is adjusted by the Gain control
for each channel and the source (Mic/Line, or
DI) is chosen using the Source selectors.
Source 2 is at the far left (when looking at the
back panel), and Source 1 is to its right. The back
panel inputs for Source 1 and Source 2 are lo-
cated such that they are directly in line with
their associated input controls on the front
panel. This lets you locate input jacks more eas-
ily when viewing from the front of the unit.
To Next Page
Loading...
