DigiDesign RM1 User Manual

Digidesign RM1 and RM2 Guide18
Analog to Digital
Digital to Analog
Power amplifier SNR is in excess of 125dB and will not contribute to system noise.
Dimensions H: 290mm (11.42 inches)
W: 155mm (6.10 inches)
D: 300mm (11.81 inches)
H: 400mm (15.75 inches)
W: 194mm (7.64 inches)
D: 370mm (14.57 inches)
Weight 6.4 kg per unit (14 lbs) 9 kg per unit (20 lbs)
Finish Dark grey texture –RAL 9004
Technical specifications for the Digidesign RM1 and RM2
Specifications RM1 RM2
Analog to Digital Specification for RM1 and RM2
Item Symbol Spec Unit Notes
Max input level Vin 20.9 dBu
Signal to noise
ratio
SNR 111
109
dB
dB
“A” weighted
20 kHz unweighted
Total Harmonic
Distortion + Noise
–95 dB 20 Hz–20 kHz,
–1 dBFS,
MBW=20 kHz
Frequency
Response
BW DC-40 kHz
Digital to Analog (Output to Power Amplifier) for RM1 and RM2
Item Symbol Spec Unit Notes
Output Voltage Vout 6.37 VRMS
Signal to noise
ratio
SNR 110
108
dB
dB
“A” weighted
20 kHz unweighted
Total Harmonic Dis-
tortion + Noise
–95 dB 20 Hz–20 kHz,
–1 dBFS,
MBW=20 kHz
Frequency
Response
BW DC-40 kHz

DigiDesign RM1 Specifications

General

Brand	DigiDesign
Model	RM1
Category	Monitor
Language	English