Digilock Lockup M User Manual

Keypad Locks
Shared & Assigned Use Functionality
Product Guide
M
Lockup M is a keypad lock designed to operate for shared or assigned use applications. In shared use functionality, the user chooses
any available locker and enters a self-selected 4-digit code to lock and the same code to later unlock. Once unlocked, the locker is
available for a different user. In assigned use functionality, the user is assigned a specifi c locker and a 4-digit code or User Key to operate
the lock. A Programming Key unique to the lock system programs up to 25 Manager Keys to the locks for management access, external
power, and inspection.
Lock Parts
Front Unit
LED Usage Indicator
Shared Use
Assigned Use
Rear Unit
User Key Manager Key* Programming Key**
Operates the lock
•••
Overrides user access
••
Allows management inspection
••
Provides external power
••
Registers Manager Keys
•
Assigns user credential (in assigned use)
•
Sets lock functionality
•
*Up to 25 Manager Keys may be registered to each lock **1 Programming Key allowed per lock group.
Keys
Initial Setup
New locks operate only by pressing = `. Locks must be setup to allow full operation.
a. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns on.
b. Touch each Manager Key to the key slot. A two-tone beep will be heard for each Manager Key that is successfully registered.
c. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d. Repeat above steps for each lock or follow Express Register Manager Key(s) instructions to setup all locks.
Express Register Manager Key(s)
The Programming Key can quickly register the same Manager Key(s) to operate multiple locks.
a. Go to the lock registered with the Manager Key(s).
b. Press =` 66 `. The LED will turn on.
c. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d. At each lock to be registered, touch the Programming Key to the key slot until a two-tone beep is heard and the LED fl ashes once
to indicate successful registration.
e. End express registration,* go to any registered lock and press =` then touch the Programming Key to the key slot to operate the lock.
* The Programming Key will continue to function in express registration mode until it is used to operate a lock.
Cover Plate
Mounting Holes
3/8" (9.5mm) Springbolt
Cover Plate Screws
123
456
789
C0
C Button Key Button
Key Slot
Numeric Keypad
Key Insertion
LockUp logo must face left.

Digilock Lockup M Specifications

General

Operation	Electronic
Power	Battery-Powered
User Interface	Keypad
Unlock Method	PIN Code
Material	Metal
Dimensions	Varies by model

Summary

Lock Parts and Keys

Front and Rear Unit Components

Details the components of the front lock unit, including keypad and LED indicator, and the rear unit.

Key Types and Functions

Explains the roles of User Keys, Manager Keys, and Programming Keys for lock operation and management.

Initial Setup Procedures

New Lock Initialization

Guides through the initial setup steps required for full lock operation after installation.

Express Register Manager Keys

Provides a method to efficiently register Manager Keys to multiple locks simultaneously.

Programming Instructions

Registering Manager Keys

Details the process for adding or registering Manager Keys to a specific lock.

Lost or Stolen Key Procedures

Outlines steps for replacing lost Programming Keys and managing lost Manager Keys.

Setting Lock Functionality

Explains how to configure the lock for either shared or assigned use functionality.

Configuring Auto Unlock

Describes how to enable or disable the auto-unlock feature for shared use functionality.

Advanced Programming and Operation

LED Usage Indicator Control

Guides on turning the LED usage indicator on or off for shared use functionality.

Assigning User Credentials

Details how to assign a User Code or User Key for assigned use functionality.

Operating with User Code

Instructions on how to lock and unlock using a user-assigned code.

Operating with User Key

Instructions on how to lock and unlock using a user-assigned key.

Operating with Manager/Programming Key

Explains how to operate the lock using registered Manager or Programming Keys.

Troubleshooting and Support

Sleep Mode and Error Indicators

Explains the lock's Sleep Mode and common error condition indicators.

Common Operational Issues

Addresses problems like unrecognized keys/codes and lack of audible feedback.

Battery Replacement Guide

Replacing 9V Batteries

Provides step-by-step instructions for replacing the lock's batteries.