Touch RFID
Shared & Assigned Use Functionality
Product Guide
2
Key Insertion
Locks are shipped with factory default settings (only operates by touching `). Each lock must be set up to operate with a Programming
Key and Manager Credentials.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
While the LED is on, insert one Manager Key or present one RFID Credential
at a time.
A two-tone beep will be heard for each Manager Credential programmed.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
Repeat above steps for each lock or follow instructions to Express Register
Manager Credentials to set up all locks.
Setup
21
43
Numeris logo must face towards the ` Button.
or
To Next Page
Loading...
