Check that the decoder is properly connected to your TV or
audio system.
Some connections to the decoder may have been “loose”.
The inserted USB memory is not recognized
Not all USB devices are compatible. Compatibility with
large-capacity USB devices is not guaranteed. The
standard USB port in the TV can provide a power supply
of about 500 mA. Proper functioning of hard disks is not
guaranteed, we recommend to use USB devices.
NOTE: the manufacturer is not responsible for any
damage or loss of data.
Some files are not recognized
The manufacturer cannot guarantee the playback of the files
even though the extension is supported: this depends on the
Codec used, the data bit rate and the resolution. Any codec
update is the responsibility of the main board manufacturer, it
is not possible to do it via SW.
The receiver or the TV switches itself off
In accordance with recent European energy saving
regulations, this receiver AUTOMATICALLY SWITCHES
OFF 3 hours after last operation, TVs after 4 hours (auto-
standby). NOTE: you can deactivate this function in the
decoder by entering the menu, SYSTEM > Other menu.
NOTES:
Technical specifications are subject to change without notice.
The contents of the manual may differ from the product of software
provided and is not subject to change without notice.
New software may change some features of the receiver.
All applications reproduced and the related trademarks belong to
their respective owners.
In case of incorrect, incomplete or erroneous or mere transcription
errors supplier (distributor) will be relieved of any responsibility and
can refuse performance of the obligation related to the error.
Photos and illustrations are for illustrative purposes only and may
not reflect the product image.
Due to updates or errors, the contents of this manual may not
exactly match the actual product.
To Next Page
Loading...
