DiGiQuest XSD2.1 - MENU; CHANNEL LIST menu

ENGLISH
11
receiver, disconnect the power supply), wait for the receiver to
automatically position itself on a channel.
Note: the installation procedure can be repeated over and over
again, just reset the receiver:
- Enter the Main Menu (MENU button).
- Press the  or  key to go to System menu and press the
key to go to Factory settings. Press OK key. Confirm whether
or not to reset the decoder to Yes or No with the  or ; key
and press OK.
WARNING: when the decoder is reset, all settings entered
by the user will be lost.
MENU
Press MENU button to enter the menu. The menu contains the
following submenu: Channel List, Channel Search,
Language, AV setting, Local Time Setting, System,
Multimedia.
Use the  or  keys to move to the desired position and use
the  key to enter the submenu (window below) and move to
the desired position. Press OK to enter. Press MENU or EXIT
to exit the menu.
CHANNEL LIST menu
This menu allows you to set up the channels.
TV/Radio Channel List
This menu allows you to set up Fav, Lock, Sort, Rename,
Delete and Move for the selected TV/Radio channels.
- In Channel List menu, highlight the TV Channel List or Radio
Channel List, press OK button to enter TV Channel List or
Radio Channel List menu.
- Press  or  button to select the desired channel.