ENGLISH
15
SYSTEM menu
System Information
You will find here important information about the software and
hardware.
Factory Setting
To reset the decoder and delete all existing channels. Use this
function with caution, all stored data will be lost! Press OK
key, a warning window will appear: highlight Yes, press OK key
to reset the decoder, delete all channels and settings entered
by the user. Highlight No, press OK key to cancel the
operation.
Timer List
This menu allows you to set the program timer.Press OK button
to enter the Timer List menu. Press BLUE button to enter the
sub menu.
Timer Mode: Off/Once/Daily/Weekly.
Wakeup Channel: select the channel you want to display by
pressing the ◄ / ► keys. Or press the OK key to open the
channel list window.
Wakeup Date: set Wakeup Date by pressing numeric button.
Press OK to save.
On Time: set On Time by pressing numeric button. Press OK
to save.
End Time: set End Time by pressing numeric button. Press
OK to save.
Highlight the Save after pressing cursor and numeric buttons
to select your desired item, and then press OK button to add
the program timer.
Once the events have been scheduled, they will all be
displayed on the first screen of the Timer menu. You can place
yourself on the line of an event and press the YELLOW key to
edit it, or press the GREEN key to delete it.
To Next Page
