Configure the wireless encryption mode. You can choose
None, WEP, WPA (TKIP), WPA (AES), WPA2 (AES), WPA2
(TKIP) or WPA2 Mixed.
Wired equivalent privacy (WEP) encrypts data frames
before transmitting over the wireless network.
Wi-Fi protected access (WPA) is a subset of the
IEEE802.11i security specification draft.
WPA2 Mixed is the collection of WPA and WPA2
encryption modes. The wireless client establishes the
connection between the router through WPA or WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
Select Personal (Pre-Shared Key), enter the pre-shared
key in the Pre-Shared Key field.
Select Enterprise (RADIUS); enter the port, IP address and
password of the Radius server.
You need to enter the username and password provided by
the Radius server when the wireless client connects to the
router. If the encryption is set to WEP, the router uses
802.1x authentication, which is Radius authentication.
To Next Page
