What to do if I can't access the internet with my Digisol Network Router even when the ADSL indicator is on?
If your Digisol Network Router's ADSL indicator is on but you still cannot access the internet, ensure that you have correctly entered the VPI and VCI information. Also, verify that the username and password you entered are accurate.
Why is my Digisol DG-BG4100NU Network Router's ADSL indicator not on?
If the ADSL indicator on your Digisol Network Router is not lit, check the connection between the ADSL interface on the device and the socket.
How to fix no LAN connection indication on Digisol Network Router?
If you're experiencing no proper LAN connection indication on your Digisol Network Router, try the following: 1. Check the connection between the device and your PC, hub, or switch. 2. Verify the running status of your computer, hub, or switch. 3. Inspect the cables connecting the device to other devices. 4. Use a crossover cable to connect the device directly to a computer. 5. Use a straight-through cable to connect the device to a hub or a switch.
What to do if I cannot access the web page using my Digisol Network Router?
If you are unable to access the web page using your Digisol Network Router, try these steps: 1. Go to Start > Run on your desktop. 2. In the DOS window, enter 'Ping 192.168.1.1' (the default IP address of the device). 3. Check the type of network cable you are using. 4. Verify the connection between the device and the computer. 5. Check the TCP/IP properties of your computer's network card.
How to troubleshoot Digisol DG-BG4100NU Network Router when all indicators are off?
If all the indicators on your Digisol Network Router are off: 1. Check the connection between the power adapter and the power socket. 2. Check whether the power switch is turned on.
Essential safety guidelines for using the router and preventing hazards.
Detailed instructions for physically connecting the router and its components.
Guide for installing the router's software and using the setup wizard.
Instructions for logging into the router's web-based configuration utility.
Configuring various WAN types (ADSL, PPPoE, 3G) and parameters.
Setting up SSID, security, and advanced wireless parameters for Wi-Fi.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Security | WEP, WPA, WPA2 |
| Weight | 200 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Antenna Type | 2 x External Antennas |
| Firewall | SPI Firewall |
| WAN Connection Type | Dynamic IP, Static IP, PPPoE |
To Next Page
