DG-BG4100NU User Manual
117
between September–Nov ember. Many countries in the
southern hemisphere may observ e DST.
Select enable or disable NTP function. You need to
enable NTP if you want to conf igure the parameters of
NTP.
Set the primary NTP server manually.
Set the secondary NTP serv er manually.
Time when the NTP client will synchronise with NTP
serv er.
Choose the time zone in which area y ou are from the
drop down list.
Log
Choose Maintenance > Log, and the page shown in the f ollowing figure appears. In this
page, you can enable or disable system log f unction and v iew the system log.
Enabling this option will display the errors such as wrong
conf iguration or password is wrong.
To Next Page
Loading...
