Digisol DG-BG4100NU - Port Mapping

DG-BG4100NU User Manual
86
Auto-Execution
Specify whether to automatically start the TR-069 after
the router is powered on.
Port mapping
Choose Advanced > Port Mapping, and the page shown in the f ollowing figure appears. In
this page, y ou can bind the WAN interf ace and the LAN interface to the same group.
The procedure for manipulating a mapping group is as f ollows:
 Select Enable to enable this f unction.
 Select a group f rom the table.
 Select interfaces f rom the WAN and LAN interface list and add them to the grouped
interf ace list using the arrow buttons to manipulate the required mapping of the ports.
Click Apply Changes to save the changes.