Digisol DG-BG4100NU - Page 85

DG-BG4100NU User Manual
85
The following table describes the parameters of this page:
Field
Description
ACS
URL
The URL of the auto-conf iguration server to connect to.
User Name
The user name for logging in to the ACS.
Password
The password for logging in to the ACS.
Periodic Inf orm Enable
Select Enable to periodically connect to the ACS to
check whether the configuration updates.
Periodic Inf orm Interv al
Specify the amount of time between connections to
ACS.
Connection Request
User Name
The connection username prov ided by TR-069 serv ice.
Password
The connection password prov ided by TR-069 service.
Path
Identif ies the PATH that the serv ice should use.
Port
Identif ies the port number that the serv ice should use.
Debug
ACS Certif icates CPE
As vital data (like user names and passwords) may be
transmitted to CPE via TR-069 protocol it is essential to
provide secure transport channel and alway s
authenticate the CPE against the ACS. Secure transport
and authentication of the ACS identity can easily be
provided by usage of HTTPS and v erification of ACS
certif icate.
Show Message
Select Enable to display ACS SOAP messages on the
serial console.
CPE sends GetRPC
Select Enable, the router contacts the ACS to obtain
conf iguration updates.
Skip MReboot
Specify whether to send an MReboot event code in the
inform message.
Delay
Specify whether to start the TR-069 program af ter a
short delay.