DG-BG4100NU User Manual
87
Others
Bridge Setting
Choose Advanced > Others>Bridge Setting, and the page shown in the f ollowing figure
appears. This page is used to conf igure the bridge parameters. You can change the settings
or v iew some inf ormation on the bridge and its attached ports.
The f ollowing table describes the parameters and button of this page:
If the host is idle for 300 seconds (def ault value), its entry is
deleted from the bridge table.
You can select Disable or Enable.
Select Enable to provide path redundancy while preventing
undesirable loops in y our network.
Click it to show a list of the learned MAC addresses for the
bridge.
To Next Page
Loading...
