DIGISYNTHETIC DS216A - HPF & LPF Configuration; Parametric Equalizer (PEQ); Limiter Settings

E HPF&LPF
Push_Param button to change parameter indicator position rotate Param
button to change parameter.
Highpass frequency range 10Hz 16.0KHz
Low pass frequency range 35Hz 22.0KHz
FPEQ
Push_Param button move indicate parameter rotate Param to adjust parameter.
Note in PEQmenu Enter is used for Bypass .
means
means
means
= means PEQ Bypass
Freq 20Hz~20.0kHz 31 ISO
Q 0.5~10 Hishelf Loshelf
Gain -12dB~+12dB 1dB
Hishelf 1.0K~20.0kHz
Loshelf 20.0Hz~1.0kHz
Note when using Hishelf Loshelf set Gain=0.0dB change Qvalue to
Hishelf/Loshelf
G Limiter
² PEQ
Loshelf
{ Hishelf
}
OPERATION
Op1 High HPF
4.00KHz Butwth 24dB
Op3 Mid limiter
Level=0.0dB
Op3 Mid limiter
hold=0.0ms
Op2 LOW PEQ:2
2.00KHz Q=3.0 +0.0dB
²
Op3 Mid limiter
ATTACK=12ms
Op3 Mid limiter
Decay=120ms
Op1 High LPF
4.00KHz Butwth 24dB