DIGISYNTHETIC DS24 - CHANNEL COPY AND LOCK FUNCTIONS; Channel Copy Operations; Device and Program Locking

Operation instruction
RECALL
2 DEMO
Fig 6
If no program, show as Fig 7 below and then return to main menu.
No Stored
Program
Fig 7
(3)LINK set: turn [FAST/EDIT] to select link or not, press [PUSH/ENTER] confirm.
When recall PRESET 2*2Way or 2Way mon Sub, can choose link or not.
After select LINK, adjust either channel parameter, then another channel parameter
will changed accordingly OUT1&OUT3 link OUT2&OUT4 link.
(4)Confirm Recall:See Fig 8.
[ENTER]TO RECALL
2 DEMO
Fig 8
Press [PUSH/ENTER] confirm, press other button to return main menu.
3.3 Channel Copy
Press [COPY] to copy input channel to output channel or copy output channel to
input channel.Turn [FAST/EDIT] to select, press [PUSH/ENTER] confirm.
(1) Input/output channel select
Fig 9
COPY
[INPUT]
COPY
[OUTPUT]
(2) Source channel select
Fig 10
INPUT COPY
Source:A
OUTPUT COPY
Source:1
(3) Target channel select
Fig 11
INPUT COPY
Target:B
OUTPUT COPY
Target:2
7