Need help?Do you have a question about the Digital Barriers EdgeVis HD-IP470 and is the answer not in the manual?
Lists the contents of the EdgeVis HD-IP470 package.
Crucial safety warnings for HD-IP470 unit deployment and operation.
Details the physical connectors available on the HD-IP470 unit.
Instructions on how to power up and shut down the HD-IP470 unit.
Guide on connecting multiple IP cameras to the HD-IP470 via Ethernet ports.
Procedures for updating the HD-IP470 firmware using USB or server.
Steps for installing a SIM card and connecting via cellular network.
Instructions for establishing a wired LAN connection.
Connects to the encoder via a temporary Wi-Fi hotspot for initial setup.
Connects to the encoder directly via a LAN port for configuration.
Configure network and cellular settings for the encoder.
Enter server connection details and authentication for the encoder.
Guide on adding IP cameras for video streaming.
Configure recording options and storage management.
Explains the Role-Based Access Control (RBAC) system for managing user permissions.
How to assign roles to users and define their scope of access.
Procedures for creating and managing users with server-wide administrative privileges.
Steps for creating and managing user accounts within specific domains.
Overview of the information displayed on a user's detail page.
How to configure the time zone settings for the encoder.
Setting up NTP for accurate time synchronization with IP cameras.
Feature for remotely configuring and controlling edge devices via the surveillance architecture.
Information on the maximum number of cameras the HD-IP470 can connect to.
Details on the achievable recording and streaming performance capabilities.
Table showing estimated recording durations based on frame rate and storage.
Lists the IP camera types and protocols (ONVIF, RTSP) supported by the encoder.
Common reasons why cameras may not be found during auto-discovery.
Guidance on resolving issues when adding IP cameras to the encoder.
List of recommended cameras for use with IP-Series encoders.
Guidance on installing the HD-IP470 mounting plate and unit in a vehicle.
Instructions for powering the HD-IP470 directly from a vehicle's battery.
Details the 3-pin power connector and input voltage specifications.
Specifications for the COM1 and COM2/3/4 serial ports.
Details the 15-pin Digital I/O trigger port.
Instructions for installing the client software for remote viewing.
How to perform in-depth configuration via the server's web interface.
General| Brand | Digital Barriers |
|---|---|
| Model | EdgeVis HD-IP470 |
| Category | TV Tuner |
| Language | English |
To Next Page