13. Next steps…
After completing the steps contained within the previous sections you should
have an IP470 encoder connected to a Vodafone Business Surveillance Server.
This section outlines the steps you should take next.
Installing a viewing client
Once the encoder is configured and connected to Vodafone Business Surveillance Server the next step is to
install Vodafone Business Surveillance Client to allow remote access to the video from the encoder.
Vodafone Business Surveillance Client is available on Windows, iOS or Android, and can be downloaded
directly from the Vodafone Support Site, along with the Vodafone Business Surveillance Client Quick
Start Guide.
Configuring the streaming parameters
Once the encoder is configured and connected to Vodafone Business Surveillance Server, it is possible to
perform a more in-depth configuration of the unit using Vodafone Business Surveillance Server’s web
configuration interface. Refer to the Vodafone Business Surveillance Server Setup Guide for further
details.
To Next Page