DIGITAL DELAY Mega 400 User Manual

3
Features and Specifications
Features:
• Microprocessor controlled timing
• Discrete I/O (input - output) construction
• Retains all numbers even with power disconnected from unit
• Large illuminated display for easy reading of information day or night
• Self-test mode on all display functions
• Dust & splash-proof key pad with detent (positive feel)
• Hit the tree twice with one or two separate buttons
• Line Lock push-button input
• Can run two separate throttle stops at once
• High and low range settings for the 4 Stage Timers
• Instant timing cycle reset
• Programmable push-button interrupt time
• Built-in digital tachometer
• Time or RPM switch
• Works on 4, 5, 6, 8, 10, and 12 cylinder engines
• Selectable Function Output (S.F.O.) with four separate functions
• Secondary transbrake
• Second throttle stop timer
• Starting Line Enhancer (S.L.E.)
• Line Lock Controller
• Programmable Tap Up/Down feature for the delay
• Programmable Throttle Stop Override for the 4-Stage Timer
• An additional second 4-Stage Timer
• Programmable Starting Line Enhancer
• Built-in drivers reaction tester
• Built-in Replay Tach (Mega 400 only)
• Digital data port for down loading (Mega 400 only)
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Specifications:
• Input Voltage Range: 10 to 18 Volts DC ( 16 Volt compatible )
• Operating Temperature Range: 0 to 150 degrees F.
• Push-button Current: .1 AMPS at 12 VDC
• Tach and RPM Switch Range: 800 to 12750 in 50 RPM increments
• Four Separate Output
• Transbrake
• Selectable Function Output ( S.F.O.)
• Throttle Stop
• Shifter
• Five Separate Inputs
• P.B. 1
• P.B. 2
• Tap P.B.
• L.L. P.B.
• Tach

DIGITAL DELAY Mega 400 Specifications

General

Brand	DIGITAL DELAY
Model	Mega 400
Category	Automobile Accessories
Language	English