Digital Equipment S830 - Statement; (Caution); Warning

Contents [ hide
1 Statement
1.1 (Caution)
1.2 Warning
2 Introduction
3 Safety instructions
4 Safety standard operation warning
4.1 (Caution)
4.2 (Warning)
5 Electrical Symbols
6 Meter Indication
7 Replacing the battery and the fuse
7.1 invalid
8 Diode
8.1 Function, Range, Resolution
9 4.2.6 Continuity buzzer
9.1 4.2.8 Capacitance
10 Capacitance measurement
11 Meter maintenance
12 General maintenance
12.1 Continuity buzzer
13 Capacitance
14 Testing conditions and diode.
15 Capacitance measurement
16 Meter maintenance
17 General maintenance
18 Precision index
19 DC voltage
20 AC voltage
21 DC current
22 AC current
23 Related Manuals:
Statement
Any content of this manual may not be reproduced in any form ( including stored, retrieved or
translated into other languages without the permission and written consent in accordance with
international copyright laws. This manual is subject to change in future versions without further
notice .
(Caution)
The “Caution” sign indicates conditions and actions that could cause damage to the meter or
equipment.
It requires that the operation must be careful. Miss operation or improper procedure may cause
damage to the meter or equipment. Do not proceed with any of the actions indicated by the caution
signs If these conditions are not met or are not fully understood.
Warning
The “Warning” sign indicates conditions and actions that are dangerous to the user.
It requires that the operation must be paid attention. Miss operation or improper procedure may cause
damage to the meter or equipment. Do not proceed with any of the actions indicated by the caution
signs If these conditions are not met or are not fully understood.