Digital Equipment S830 - Introduction; Safety instructions; Safety standard operation warning; (Caution)

Please read the instructions carefully and pay attention to the safety warnings before using the meter.
Introduction
This watch is a digital multimeter that can be carried around. It has stable performance, high
precision, low power consumption, novel structure, safety and reliability, and is an ideal measuring
meter for users.
The meter can measure DC voltage, AC voltage , DC current, AC current, resistance, diode, continuity
and capacitance with non-contact voltage detection function to remind users operating safety, making
the operation safer for users.
This manual contains relevant safety information and warnings, etc. Please read the contents carefully
before using the meter and strictly abide by all warnings and precautions.
Safety instructions
This digital Multimeter is designed and manufactured in accordance with the the safety requirements
of IEC-61010. It meets the requirements of double insulation, 600V CAT Ill and pollution level 2 of
IEC61010. Before using the Multimeter, please read the users manual carefully, otherwise the
protection function may be reduced or invalid.
Safety standard operation warning
To avoid possible electric shock or personal jury, please strictly abide by the following specifications:
Please read “Safety Information” before using the meter. And use the meter in accordance with
the regulations, otherwise the protection function may be reduced or Statement
Any content of this manual may not be reproduced in any form ( including stored, retrieved or
translated into other languages without the permission and written consent in accordance
with international copyright laws. This manual is subject to change in future versions without
further notice .
(Caution)
The “Caution” sign indicates conditions and actions that could cause damage to the meter or
equipment.
It requires that the operation must be careful. Misoperation or improper procedure may cause damage
to the meter or equipment. Do not proceed with any of the actions indicated by the caution
signs If these conditions are not met or are not fully understood .
(Warning)
The “Warning” sign indicates conditions and actions that are dangerous to the user. It requires that
the operation must be paid attention. Misoperation or improper procedure may cause damage to the
meter or equipment. Do not proceed with any of the actions indicated by the caution signs If these
conditions are not met or are not fully understood.
Please read the instructions carefully and pay attention to the safety warnings before
using the meter.
To avoid possible electric shock or personal jury, please strictly abide by the following specifications:
Please read “Safety Information” before using the meter. And use the meter in accordance
with the regulations, otherwise the protection function may be reduced or invalid.
Check the case before using the meter. Check for cracks or missing plastic parts. Please carefully
check the insulation near the input tenninals
Do not use the meter if it is not working properly or is dama ged.
It is forbidden to touch the charged body with voltage exceeding 30V true RMS AC, 42V AC peak
or 60V DC.
The meter should be used according to the specified measurement category, voltage or